II.B.1 Laryngoscopes and blades
II.B.2 Tracheal tubes
II.B.3 Oral and nasal airways
II.B.4 Stylets and introducers
Blades, tubes, airways, bougies
The equipment view of intubation: how each device is built, how it is sized, and how it fails in your hands.
By the end you can
- Choose a blade, a tube type, a size and a depth for the patient in front of you
- Explain cuff design, hold cuff pressure in range, and predict what nitrous oxide does to it
- Use a stylet, bougie or exchange catheter safely, and fix a tube that will not pass
Your case
OR 9 · Lap sigmoid colectomy · Induction
Mr. V, 58, 96 kg, 175 cm. Mallampati III, full beard, two loose upper incisors. You plan a hyperangulated video laryngoscope with a rigid stylet.
Your tech asks which tube to open, and how deep you want it taped.
SpO2 100%
HR 78
Weight 96 kg
Height 175 cm
Hold that thought
- Which blade, which tube, what size, and what number at the teeth?
- The view is a clean grade 1, but the tube stops at the cords. What do you change?
- Cuff read 24 cmH2O after intubation. An hour into nitrous oxide it reads 44. Why, and what now?
You will answer these at the end of the lesson.
Members only
The rest of this lesson is for members
Membership opens all 98 lessons, every cheat sheet and memory card, the full question bank, and simulation exams.
Not ready to join? Free account: take the 50-question diagnostic, see your weakest domain, and get a study plan built around your exam date. No card.
Start free
Inside this lesson
- Start
- The case
- Blade design
- Video blades
- When it fails
- Inside the tube
- Cuffs and pressure
- Size and depth
- Specialty tubes
- Oral and nasal airways
- Blade and tube picker
- Bougies
- Exchange and confirm
- Lock it in
- Board traps
- Cheat card
- 5-question quiz
- Wrap-up