II.A.9 Breathing circuits
II.A.10 CO2 absorbents
II.A.11 Machine faults
Breathing circuits and CO2 absorbents
How a circle system moves gas, how a Mapleson circuit gets by without valves, and how to read the monitor when either one fails.
By the end you can
- Trace one breath through a circle system and say what each part does
- Tell an exhausted absorbent from a failed valve, a leak, or a disconnection
- Pick a Mapleson system and a fresh gas flow for the ventilation you plan
Your case
OR 3 · Posterior fusion · 2 hours 40 min in
Ms. R, 58, 74 kg. Volume control, set tidal volume 500 mL. Sevoflurane at a fresh gas flow of 1 L/min since induction.
Your end-tidal CO2 has drifted from 38 to 52 over twenty minutes. Nothing about the patient has changed.
EtCO2 52
Inspired CO2 8
Peak pressure 22
Returned VT 490
Temp 35.4 C
Hold that thought
- Why is the inspired CO2 sitting at 8 instead of 0?
- How do you tell a spent absorbent from a stuck valve without taking the machine apart?
- Is 1 L/min of sevoflurane for a long case a problem?
You will answer these at the end of the lesson.
Members only
The rest of this lesson is for members
Membership opens all 98 lessons, every cheat sheet and memory card, the full question bank, and simulation exams.
Not ready to join? Free account: take the 50-question diagnostic, see your weakest domain, and get a study plan built around your exam date. No card.
Start free
Inside this lesson
- Start
- The case
- The circle
- Path of a breath
- Valve failure
- Dead space
- Low flow
- Mapleson systems
- Bain and bags
- Compliance and leaks
- Absorbent chemistry
- Absorbent hazards
- Fault finder
- Lock it in
- Board traps
- Cheat card
- 5-question quiz
- Wrap-up